Print
Category: Web pages
Hits: 1859

Brakes - Mechanical   Price Inc. VAT
Brake pads fit per brake £2.50
Inner cable fit £2.50
Outer casing fit £2.50
Brake adjustment £2.50
Brake lever fit £2.50
Rotor fit / replacement £5.00
Calliper fit / replacement £5.00
Disc brake line fit (Per wheel) £5.00
Brake service - Cable pull £25.00
Brake service (Callipers, V & canti) – each £12.50
Drum brakes service including pads- Front £65.00
Drum brakes service including pads- Rear £82.50
Drum brake pads fit per brake – Front £25.00
Drum brake pads fit per brake – Rear
£55.00
Brakes - Hydraulic   
Brake pads fit per brake £2.50
Brake lever fit £25.00
Brake line fit £25.00
Brake adjustment £15.00
Rotor fit / replacement £5.00
Calliper fit / replacement £25.00
Disc brake set fit (Per wheel) £25.00
Brake service – Per calliper £65.00
Disc brake line bleed and re-fill
£20.00
Gears   
cable(s) fit per line no bar tape £10.00
cable(s) fit per line with bar tape £20.00
Gear shift fit £25.00
Gears adjustment £15.00
Chain ring fit – each £10.00
Derailleur fit £20.00
Chain fit £10.00
Chain fit – With full cover £25.00
Chain de-grease, dry and lubricate – No cover £20.00
Chain de-grease, dry and lubricate – With full cover £25.00
Chainset fit (Cassette, chain and crank set) £45.00
Cassette fit £15.00
Sprocket fit – Hub gear without cover £25.00
Sprocket fit – Hub gear with cover £30.00
Crank set fit £20.00
Hanger alignment/fit £20.00
Gear sercice – Cassette & derailleur type (Cabls excl) £60.00
Hub gear service 3 – 5spd (Cables excluded) £125.00
Hub gear service 7-8spd(Cables excluded) £125.00
Hub gear service 9spd+ (Cables excluded)
£125.00
Transmission  
Pedals fit / replacement £5.00
Crank fit / replacement £5.00
Pedals service (Serviceable type only)
£15.00
Bottom bracket  
Fit/Service standard and external £50.00
BB30 / BB90 fit £50.00
Eccentric fit £50.00
Service Power Torque £50.00
Service Uptra Torque £50.00
Housing alignment £60.00
Cannondale and other imports service
£50.00
Saddle   
Saddle fit and adjustment £2.50

Seat pin fit
£2.50
Fork  
Fork alignment £20.00
Fork replacement £35.00
Headset   
Service - Bicycle £50.00
Replacement parts £35.00
Service - Cargo
£50.00
Suspension service   
Rear shocks £50.00
Cannondale HeadShock and lefty forks + Parts £130.00
Other Front suspension forks + Parts
£85.00
Wheels  
Replace inner tube on standard wheel £16.50
Fit inner tube/Tyre- hub gear without cover £16.50
Fit inner tube/Tyre – hub gear with cover £16.50
Fit sealed bearings per hub £20.00
Axle cones adjustment £10.00
Axle cones adjustment and grease £15.00
Axle fit, cone adjustment and grease £20.00
Tubeless fit £20.00
Wheel true £10.00
Wheel true and spokes re-tension (Precision balance) £30.00
Wheel build £45.00
Hub service £20.00
Replace hub
£45.00
Spokes  
Spoke replacement £15.00
Spoke replacement – Disc wheels £25.00
Spoke replacement – Hub gear with cover
£30.00
Handle bar  
Grips fit £2.50
Bar tape fit £5.00
Stem fit £2.50
Handlebar bar fit – MTB £15.00
Handlebar bar fit – Road £30.00
Handlebar bar fit – Other £40.00
Handlebar size reduction
£10.00
Accessories fit  
Computer FREE*
Lights FREE*
Dynamo - Classic FREE*
Clip on mudguards set £10.00
Side stand FREE*
Full mudguard sets £30.00
Rear rack FREE*
Front rack FREE*
Child seat – Hamax tube set £10.00
Child seat – Other £20.00
Padlock FREE*
Basket
FREE*
Electric bicycles with BOSCH & YAMAHA Motors  
Electric circuit diagnosis & troubleshooting £95.00
Electric brake line replacement £15.00
Electric control unit replacement £65.00
Throttle replacement £45.00
(** Parts excluded)
 
Welding /hr  
Steel £65.00
Stainless steel £95.00
Aluminium £125.00
Titanium
£150.00
Other Welding /hr  
Soldering £40.00
Brazing £50.00
Fabrication and modifications
£65.00
Security  
Bespoke bicycle security – Free quotes  
Other  
Other repairs / Requests not listed  POA
Bike fit - Basic £25.00
Bike fit - Pro £200.00
Lost keys / Bicycle release £20.00
Di2 diagnosis, trouble shoot & firmware updates £125.00
Di2 or EPS conversion from cable to electronic £195.00
Power meter fit, calibration and setup  £75.00
Group event cycle back up – UK(non-motorised + travel expense) POA
Group event cycle back up – UK (motorised + travel expense) POA
Group event cycle back up – Continent (plus travel expense) POA
Bike valet £45.00
Bike Wash £20.00
Custom build consultation – road & MTB  £50.00
Bike build from a box - 2 wheels £20.00
Bike build from a box - Cargo bike £150.00
Re-spray (Sand blast, powder coat + bake. Frame only) Strip & rebuild labour excluded £99.00
Strip & rebuild labour
£150.00
Frame preparation  
Headset facing and reaming £45.00
Fork tube cut to size, star nut & crown fitted £20.00
Seat tube reamed to size £35.00
Bottom bracket chase £35.00
Bottom bracket face £35.00
Disc brake mount face - Each
£30.00
Servicing  
Safety check £25.00
Express service £70.00
General service £115.00
Overhaul £198.00
Minimum charge apply / qtr hr £35.00
   
   
   
   
© CYCLEDELIK LIMITED

 

 

  BASIC SERVICE (BS) EXPRESS SERVICE (ES) GENERAL SERVICE (GS) GEAR SERVICE (GRS) BRAKES SERVICE (BS) OVERHAUL (OVH)
Bottom bracket drained and cleaned  
 
     
 
 
Bottom bracket housing chased    
Bottom bracket thread protected with anti-seize    
Bottom bracket faced if necessary    
Bottom bracket electronics and cable wire routes tidy    
Bottom bracket fitted, replaced or upgraded    
Headset disassembled & housing cleaned    
Headset bearings checked for wear & serviced    
Headset fitted and greased    
Headset compressed to BS6102    
Hub (s) front disassembled and serviced accordingly    
Hub (s) rear disassembled and serviced accordingly    
Rim tape & inner tubes checked    
Pedals serviced    
Pedals fitted and torqued - Vector torque checked    
Freehub body checked and serviced accordingly          
CABLES: Discard/Recycle      
Chain wear checked and degreased if <0.7 or recycle      
Cassette / Sprocket wear check and cleaned or recycle      
Front derailleur disassembled, checked, serviced      
Rear derailleur play check, disassembled, serviced      
Chainrings checked for wear and cleaned or recycle      
Cassette freehub body checked and serviced      
Rear wheel hub service       
Hanger stats recorded      
REBUILD: Fit new gear cables and pre-stretch      
Cage rotation check      
Cage height check      
Front derailleur H + L set & locktight      
Front derailleur mounting & pinch bolt torqued       
Rear derailleur H + L set & locktight      
Rear derailleur hanger bolt torqued to spec      
Rear derailleur mounting bolt torqued to spec      
Jockey wheels cleaned and bolts torqued      
Rear derailleur cable pinch bolt torque                           
RHS gear shifter mechanism checked for integrity - INDEX      
LHS gear shifter mechanism checked for integrity - INDEX      
Brake pads wear check       
Rims / discs condition check                       
Braking surface check      
Rims / Discs true       
Callipers stripped, serviced and rebuilt      
Callipers bolts torqued      
Brake pads in line with rims / Discs      
Inner & outer cables checked at both ends for integrity or recycle      
Front brake pads assembly and position check      
Front brake pads bolts torqued or pin secure (disc)      
Front brakes operational & leaver travel to BS6102       
Rear brake pads assembly and position check      
Rear brake pads bolts torqued or pin secure (disc)                      
Rear brakes operati©nal & leaver travel to BS6102       
Brake levers mounting bolt torqued      
Brake cable pinch bolts torqued       
Roller brakes serviced       
Drum brakes checked for wear & serviced      
Front hydraulic line integral and no leaks      
Rear hydraulic line integral and no leaks      
Front brake lever integral  - Hydraulic ones= Intact      
Rear brake lever integral  - Hydraulic ones= Intact      
Gears fine tuned       
Hanger adjusted      
Jockey wheels and chainrings cleared of debris      
Rack / Side stand & mudguards checked      
Gear inner cables checked at both ends for integrity      
Accessories free of play      
All cables checked for interference & route is clear      
Handlebar Grips / Tape condition check      
Fork rotation & play check      
Fork joint with tube checked behind crown race      
Front wheel play check       
Front wheel spokes in tension & true      
Front tyre (s) pressure & directional rotation check      
Rear wheel play check and adjust      
Rear wheel spokes in tension & true      
Rear tyre (s) pressure & directional rotation check      
Seat to handlebar to front wheel in line      
Pedals taken out, threads cleaned & anti-seize applied      
Pedals checked for bearings play / Cleaned & lubricated      
bottom bracket fitted correctly and free of play      
All joints, lines, connectors, pivot axles lightly lube & grease      
Chain wear checked & lube    
Brakes operational to BS6102 bite square on the braking surface    
Chasis brackets in tension    
Frame pivot axle free of play    
Stem fitted to BS6102 check - Traditional style     
Stem clamp bolts torqued              
Face plate / Handlebar binder bolt(s) clamped Z torqued    
Front wheel (s) lock check / Bolts torqued    
Front tyre (s) assembled to BS6102 check    
Front tyre debris free / deep cuts / TWI checked & road worthy    
Rear wheel (s) lock check / Bolts torqued    
Rear tyre (s) assembled to BS6102 check    
Rear tyre debris free / deep cuts / TWI checked & road worthy    
Seat pin check and fitted to BS6102    
Saddle clamp bolt(s) torque     
Pedals torqued    
Crank bolts torqued    
Frame,  fork & drop outs check for  fatigue/failure